Independent contractors, licensed in CA

904 cities and towns covered

Chimney Inspection in California

California adds a trigger no other state has: an inspection after any earthquake felt in the building. Movement cracks masonry in ways weather never does.

Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about a chimney inspection

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Chimney Inspection in California

What to ask for on Chimney Inspection

  • Level 1, 2 and 3 to the NFPA 211 standard
  • Camera survey of the full flue
  • Unreinforced masonry assessment
  • Post-earthquake inspection
Call us about this
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Unreinforced stack strapped to the framing in California
Unreinforced stack strapped to the framing Galvanized strapping and anchor plates worked through the attic — a day of work rather than a rebuild.
Spark arrestor to the specified aperture in California
Spark arrestor to the specified aperture Required across State Responsibility Areas, and the cheapest part on the chimney to get wrong.
Flexible coating over a repaired crown in California
Flexible coating over a repaired crown Bridges movement in a way rigid mortar cannot, which matters on a structure that keeps moving.

Which level, and the California addition

NFPA 211 defines three levels nationally. Level 1 is a visual check of readily accessible parts. Level 2 adds a camera survey of the whole flue plus accessible attic, crawl space and basement, and is required on a property transfer, on any change of fuel or appliance, and after a chimney fire.

The addition here is seismic. Any event that could have damaged the chimney triggers a Level 2, and in California that includes an earthquake you felt. Damage from movement is frequently invisible from the ground and entirely invisible from inside the room.

What the inspector should be establishing

Whether the chimney is unreinforced masonry, whether it is tied into the framing, and whether any cracking is movement or weather. Those three answers decide everything that follows.

Weather cracking versus movement cracking

Weather damage is surface scaling and spalled faces, distributed across exposed elevations. Movement produces a stepped diagonal crack tracking the mortar joints, or a clean separation where the chimney meets the wall. They need different work.

What age tells you before anyone looks

Brick chimneys on houses built before roughly 1940 are very likely unreinforced — brick and mortar with no steel and no tie into the building. That is the largest single population of chimney hazard in the country and it is concentrated here.

After Northridge

A great many basin chimneys were braced or removed after 1994. Plenty were not, and the ones that were not are still standing unbraced on houses that have changed hands several times since.

What a good report contains

Written, with camera stills and exterior photographs, separating safety defects from wear. It should state plainly whether the stack is reinforced and whether it is anchored.

Chimney Inspection — frequently asked questions

How often should a chimney be inspected?

Annually, whatever it vents, and additionally after any earthquake felt at the property.

Does a home inspector cover this?

Not to this standard. A general home inspection does not include a camera survey, and rarely comments on whether a stack is unreinforced.

The fireplace is decorative. Still needed?

Yes, and decorative fireplaces carry the most neglected faults. The seismic question is also independent of whether you ever light it.

We felt a quake but see no damage. Do we need one?

Worth it. Cracking from movement frequently shows above the roofline or inside the flue, neither of which is visible from the room.

What does it cost?

It depends on the level and the chimney, and the contractor you are introduced to sets their own price.

Call now How it works