Independent contractors, licensed in CA

Covering 11 ZIP codes

Chimney Waterproofing in Santa Monica, CA

On a stucco chimney the wrong sealant is worse than none at all. Water that gets behind render has nowhere to go, and a film on the outside guarantees it stays there.

  • Covering 11 Santa Monica ZIP codes
  • Free to use, no obligation
Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about waterproofing in Santa Monica

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Chimney Waterproofing in Santa Monica, California

What to ask for on Chimney Waterproofing in Santa Monica

  • Breathable siloxane, not film-forming sealant
  • Correct for stucco as well as brick
  • Applied after repairs, never before
  • Vapor-permeable so the wall can dry
Call about waterproofing
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit in Santa Monica. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Unreinforced stack strapped to the framing in Santa Monica, CA
Unreinforced stack strapped to the framing Galvanized strapping and anchor plates worked through the attic — a day of work rather than a rebuild.
Spark arrestor to the specified aperture in Santa Monica, CA
Spark arrestor to the specified aperture Required across State Responsibility Areas, and the cheapest part on the chimney to get wrong.
Flexible coating over a repaired crown in Santa Monica, CA
Flexible coating over a repaired crown Bridges movement in a way rigid mortar cannot, which matters on a structure that keeps moving.

Chimney Waterproofing in Santa Monica

Much of Santa Monica's housing was built before central cooling was normal and often before ductwork was, so heating and cooling arrived separately and at different times. That is why so many houses here run a boiler for heat and something entirely different for cooling.

About 56% of homes in Santa Monica predate 1970, so the original heating system has usually been replaced at least once and cooling added afterward; 35% of them heat with electricity, so a fireplace here is used by choice rather than by necessity and tends to be inspected far less often. (US Census ACS 2022)

Why breathability matters more on stucco

A siloxane repellent penetrates and lines the pores so liquid water cannot enter, while leaving them open enough for vapor to leave. A film- forming sealant stops both.

On brick that traps moisture and spalls the face. On stucco it does something worse: water that gets behind the render — through a crack, from the crown, from failed flashing — cannot escape, and the render debonds from the wall. Hollow-sounding stucco is exactly that, and it is very common on California chimneys.

How to tell what you are being sold

Ask if it is vapor-permeable and ask for the data sheet. A repellent darkens the surface while wet and dries back close to its original appearance. A sheen means the wrong product.

Sun and heat

Hard California sun degrades surface films quickly, which is another reason penetrating repellents outperform coatings here.

Sequence decides whether it works

Waterproofing is a finishing step. Over cracked stucco or spalling brick it seals water in. Before repointing it stops new mortar bonding. On a chimney with a cracked crown it does nothing about where the water is actually entering.

The right order

Crown, then masonry or stucco repair, then flashing, then a cap. Waterproof what is sound at the end.

It is not a repair

A repellent slows absorption into sound material. It does not bridge cracks or stop a leak.

The full guide: everything about chimney waterproofing — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in Santa Monica.

Areas we cover in Santa Monica

That includes properties near 16th–26th Street Corridor, Annenberg Community Beach House, Bergamot Arts District and Bergamot Station Arts Center, and everywhere else in Santa Monica.

Chimney Waterproofing in Santa Monica — FAQs

What qualifications should a Santa Monica chimney company have?

Ask for three things and check them: current liability insurance, CSIA certification from the Chimney Safety Institute of America, and whatever license or registration your state requires for the work in question. Ask to see the documents rather than taking the logo on the van as proof. For anything involving gas appliance venting, ask separately who is pulling the permit.

Can you work on a rental or multi-family property in Santa Monica?

Yes. Ask for the findings in writing so a landlord or managing agent can act on them. In multi-family buildings the usual complication is the stack itself — one chimney frequently carries flues for several units with different owners, so establishing whose flue is whose comes before anyone quotes work.

Nothing vents into our chimney any more. Does it still matter?

Less urgently, but yes. An uncapped disused flue collects rain, leaves and nesting for years with nobody noticing, and water sitting inside it damages the structure from within. If the chimney is genuinely finished with, removing it above the roofline and roofing over is a legitimate option. If anything at all still vents into it — a water heater in particular — then it matters as much as it ever did.

What chimney problem is most common around Santa Monica?

Unreinforced brick stacks on pre-war bungalows with no strapping into the framing. That pattern is regional rather than universal — los Angeles, Pasadena, Long Beach, Glendale and the San Gabriel Valley. It is worth knowing before you book, because it tells you what someone should be looking hardest at here.

How much does chimney work cost in Santa Monica?

It depends entirely on what the chimney turns out to need, and the spread is wide. Sweeping, an inspection, a cap or a damper repair are the inexpensive end and are usually done in one visit. Relining, rebuilding above the roofline and full crown recasting are the expensive end. Nobody can quote it honestly over the phone, which is why the inspection comes first. The contractor you are introduced to sets their own prices and agrees them with you directly.

Do you cover all of Santa Monica?

Yes — all 11 ZIP codes in Santa Monica and the surrounding towns. Tell us where you are and we put you in touch with a company that covers it.

How long does it last?

Around ten years for a quality siloxane, less under hard sun and coastal exposure.

Our chimney is stucco and sounds hollow.

That is debonded render with water behind it. Waterproofing over it traps the water. The render needs cutting back to sound material first.

Neighborhoods we cover in Santa Monica

Chimney work across Santa Monica and the areas around it.

  • 16th–26th Street Corridor
  • Annenberg Community Beach House
  • Bergamot Arts District
  • Bergamot Station Arts Center
  • Camera Obscura Art Lab
  • Civic Center / Wilshire Corridor
  • Civic Center area
  • Douglas Park
  • Downtown
  • Gillette Regent Square
  • Heal the Bay Aquarium
  • Historic Ocean Park
  • Historic Sunset Park
  • Main Street Corridor
  • Memorial Park
  • Mid-City Santa Monica
  • Muscle Beach
  • North of Montana
Call now How it works